SAM4S Cash Register Packages

Complete packages reduce the risk of buying a register, scanner, printer or cable that does not work with the rest of the checkout setup.

Package directions

  • Small Business Starter Register
  • Retail Register With Barcode Scanner
  • Liquor and Convenience Store Register Package
  • Restaurant Register With Kitchen Printer
  • Replacement Register With Programming Review
  • Two-Register Package
  • SAM4POS Touchscreen Package

Each package should be confirmed against item count, departments, taxes, printer requirements, scanner interface, payment workflow and programming needs.

Multi-register and volume orders

Need two registers, or ten at the same business? Request volume pricing so the equipment, programming and peripherals can be quoted as one project.

Request volume pricing · Request a multi-register quote

See the actual hardware

The registers these packages are built around

A package is a register plus the programming and peripherals that make it work on your counter. These are the current registers a package can be built on.

SAM4S SPS-340 flat-keyboard dual-printer cash register

SPS-340

SAM4S SPS-340 Flat-Keyboard Dual-Printer Cash Register

  • Flat keyboard
  • Dual station (receipt + journal)
  • Electronic journal
  • 2 × RS-232C serial, D-Sub-9M (COM1 & COM2, standard)
  • 2 × RS-232C serial, RJ45 (COM3 & COM4, optional 2-port board, CRS item 501531)
  • Ethernet for inter-register communications (IRC) between SPS-300 registers
  • Additional RJ11 (24V) port for a second cash drawer

Detailed retail or food-service checkout.

SKU 950037$915.00
See this register
SAM4S SPS-345 raised-keyboard dual-printer cash register

SPS-345

SAM4S SPS-345 Raised-Keyboard Dual-Printer Cash Register

  • Raised-key keyboard
  • Dual station (receipt + journal)
  • Electronic journal
  • 2 × RS-232C serial, D-Sub-9M (COM1 & COM2, standard)
  • 2 × RS-232C serial, RJ45 (COM3 & COM4, optional 2-port board, CRS item 501531)
  • Ethernet for inter-register communications (IRC) between SPS-300 registers
  • Additional RJ11 (24V) port for a second cash drawer

Detailed retail and item-driven checkout.

SKU 950060$929.00
See this register
SAM4S ER-260EJ raised-key electronic cash register

ER-260EJ

SAM4S ER-260EJ Raised-Key Electronic Cash Register

  • Raised-key keyboard
  • Single station (receipt)
  • Electronic journal
  • 3 × RS-232 serial (RJ45)
  • USB (flash drive or scanner, HID only)
  • Ethernet/LAN (10 Base-T) — documented for DC Direct integrated payment

Small retail, service, and food-counter applications.

SKU 950084$599.00
See this register

Not sure which of these fits?

Compare them side by side, answer a few questions about your counter, or tell us how the business actually rings sales and we will narrow it down.

Compare all registers Use the Register Finder → Ask for help choosing →

Cash register basics that matter

Two simple hardware choices can narrow the right cash register quickly.

Keyboard style and the number of built-in printer stations are practical clues to how a register is intended to be used. They are not absolute rules, but they are excellent starting points.

Keyboard style

Flat keyboard

A flat, programmable keyboard is usually the better fit for restaurants and food service. It gives the operator a large field of programmable item and function keys for fast, repetitive order entry.

Typical fit: restaurants, delis, cafeterias, concessions and other food-service counters.

Keyboard style

Raised keyboard

A raised-key keyboard is usually used in retail, especially when a barcode scanner does most of the item entry. The operator still has dedicated department, tender and function keys without needing a large flat item-key area.

Typical fit: convenience, liquor, specialty retail and stores using UPC or barcode scanning.

Built-in printing

One-printer model

A one-printer register has a single built-in print station, normally used for the customer receipt. This is often enough when the business does not need a continuous paper journal retained inside the register.

Ask: Do you only need the customer receipt, or do you also want an internal paper record?

Built-in printing

Two-printer model

A two-printer register adds a second internal journal station. That journal roll stays inside the register and creates an analog paper record of transactions in addition to the customer receipt.

Useful when: the owner wants a physical transaction journal for review, backup or established operating procedures.

Important distinction: the second built-in printer is a journal printer. It is different from an external kitchen, receipt or remote printer connected to the register.
Package planning: Start with the right keyboard and printer configuration, then add the scanner, any additional drawer, external printer, programming and supplies the business actually needs.
Use the Register FinderRetail registersRestaurant registersAsk a register specialist

Still deciding whether a register is the right shape of tool? Read why businesses still buy cash registers, or see how SAM4S compares with other register brands.

Complete cash-register packages

Start with the business scenario, then build the package around the right register.

A useful package is more than a list of hardware. We first identify the counter workflow, then confirm the register, programming and only the peripherals that are known to fit the selected equipment. Package components and pricing depend on the final configuration.

Small business starter

Small business starter register

For a first register at a single counter — a new shop, a market stall moving indoors, a small service business that has been ringing sales by hand.

  • Choose the smallest register that still covers the item count, reports and keyboard style the owner needs.
  • Core programming: receipt information, taxes, a workable department or item structure, clerks and tender keys.
  • Peripherals are optional at this stage — a drawer and paper are usually enough to open.
  • Verify: item count and report expectations before choosing the model.
Find a starter register →
Retail starter

Retail register with barcode scanning

For stores that primarily ring merchandise, use departments or items and want barcode entry instead of manual keying.

  • Choose the register first based on item count, keyboard preference, reports and workflow.
  • Add a scanner only after the exact register, scanner interface and required cable are confirmed.
  • Program taxes, departments/items, clerks, receipt information and primary tender keys as required.
  • Verify: scanner interface and cable against the exact register model before ordering.
See scanning setups →
Liquor store

Liquor store register package

For fast retail counters with a large repeat-item list, frequent scanning and owners who watch category-level reporting closely.

  • Register selection usually favours a raised keyboard and enough item capacity for the shelf list.
  • Programming focuses on departments or categories, item pricing and the reports the owner actually reads.
  • Scanning is common here, so the scanner decision is made alongside the register rather than afterwards.
  • Verify: item capacity, scanner interface and any state or local tax handling the business must apply.
Start the Finder →
Convenience store

Convenience store register package

For high-frequency counters with a mixed basket — packaged goods, drinks, tobacco and small service items — where speed at the register matters more than anything else.

  • Register selection favours fast repeat entry, a durable keyboard and dependable reporting.
  • Programming covers departments, frequently sold items, clerks and the tender mix the counter actually takes.
  • Scanning and a second drawer are common additions and are specified with the register.
  • Verify: item capacity, scanner and drawer requirements, and any category-specific tax handling.
Start the Finder →
Restaurant / service

Restaurant register with kitchen printer

For food-service or service counters where employees benefit from a purpose-built key layout, fast repeatable entry and orders reaching the kitchen.

  • Start with the register and keyboard workflow rather than assuming a particular peripheral bundle.
  • A kitchen printer is a separate remote peripheral — it is not the same as a register's second built-in station, which is normally a journal.
  • Program taxes, departments or menu items, clerks, tenders, receipt information and reporting needs.
  • Verify: printer interface, cable run and routing support on the exact register before ordering.
Explore restaurant register guidance →
Hybrid Android

Hybrid Android cash register package

For a counter that has outgrown a traditional register but still depends on fast physical key entry. The SAM4S SAP-630II pairs an Android operating environment with a cash-register keyboard, touchscreen, integrated receipt printing, operator and customer displays and a cash drawer.

  • Keyboard configuration comes first: FT is the flat-keyboard build, RT is the raised-key build.
  • Programming and application setup are defined as their own scope — an Android system is configured, not simply keyed.
  • Peripherals and any payment terminal are specified alongside the system rather than assumed to carry over.
  • Verify: everything — software, payment terminal, peripherals, Android version and interfaces are confirmed together before we quote.

A traditional register is still the simpler and less expensive answer for many counters. We will say so if that is what your workflow points to.

Get a hybrid Android quote →
Replacement

Replacement register with programming transfer

For businesses replacing an older SAM4S, Casio, Sharp or other traditional register while trying to preserve a familiar workflow.

  • Record the exact old model, keyboard, reports and connected equipment before selecting the replacement.
  • Reuse an existing scanner, printer, drawer or scale only after compatibility is confirmed.
  • Rebuild or transfer programming according to what the replacement model and available tools support.
  • Verify: everything — we do not publish one-to-one replacement mappings.
Use the replacement center →
Two registers

Two-register package for one location

For a business adding a second lane, or opening with two counters, that wants both registers to behave the same way.

  • Define one register model and one programming standard, then apply it to both machines.
  • Decide which peripherals repeat at each lane and which are shared.
  • Programming is defined once and repeated rather than rebuilt per machine.
  • Verify: whether the second lane has the same workflow, or a different one that changes the model choice.
Request a two-register quote →
Multiple registers

Multi-register package for one business

For a business with several checkout lanes at the same location that wants consistent equipment and programming across every register.

  • Define one register workflow and programming standard first.
  • Document which peripherals repeat at each lane and which equipment is shared.
  • Quote the system as one coordinated purchase before equipment is finalized.
  • Verify whether any lane has a different workflow that changes the register or peripheral choice.
Request a system quote →
Compatibility depends on the exact register model, interface, cable, firmware and programming. We verify the correct configuration before recommending an accessory — no peripheral above is confirmed for a particular register until we have checked it. For Android systems: software, payment-terminal and peripheral compatibility depends on the exact hardware configuration, Android version, application, interface, cable, firmware and programming. We'll verify the complete configuration before recommending a system.
1Register or systemSelect the model that fits the actual checkout workflow.
2ProgrammingDefine the setup needed for the business to operate.
3Compatible peripheralsAdd only equipment whose exact interface and requirements are confirmed.
4Startup planDecide whether guided onboarding or a coordinated multi-register setup is needed.
Larger system purchase

Ask whether financing is available for the configured order.

Financing availability and terms can vary by order and provider, so the system should be configured before financing is discussed as a purchase option.

Ask about purchase options
Optional after the equipment decision

Payment processing can be reviewed separately.

Changing processors is not required to buy a cash register or an Android system. If you want a second opinion, we can review the current statement after the hardware and workflow requirements are clear.

Request a statement review
Not sure which scenario fits? Use the Register Finder first. It keeps the equipment decision ahead of programming, payment processing and support — and it will tell you whether a traditional register, a hybrid Android register or a touchscreen POS actually fits.
Use the Register Finder Call (855) 867-2647 →

The complete checkout, not just the box

Register, programming, accessories and payments from one team.

Most counters do not fail because the register was wrong. They fail because the register, the programming, the peripherals and the payment terminal were bought separately and never checked against each other. We can quote the whole thing as one setup.

  1. Cash register
  2. Professional programming
  3. Accessories and supplies
  4. Integrated payments
Request a statement review See payment and processing options →

Already have a SAM4s?

You do not need a new register to look at payments. Tell us the exact model and how you take cards today, and we will find out whether your current register can be connected to integrated payment processing. Whether it can depends on the model, interface, firmware and programme, so we check rather than assume.

Ask about your current register →

Programmes we can review

  • Interchange-plus
  • Flat-rate
  • ERR pricing
  • Cash discount
  • Dual pricing
  • PIN debit
  • EBT
  • Statement analysis
  • Contract buyout review
  • Equipment programmes

Processing programmes, pricing, equipment and merchant approval are subject to underwriting and written agreement terms. Programme availability and requirements vary, and nothing here is an offer, a quote or a guarantee of approval or savings. You can buy any register, package, accessory, support or programming from us without changing payment processors.

Ready for the next step?

Turn this information into the right cash-register setup.

Use the Register Finder if you are still narrowing down equipment, or talk with a specialist about the register, programming, replacement equipment and accessories that fit your business.

Already ordered a SAM4S register? Use the onboarding worksheet to send us the programming, peripheral, payment-terminal and go-live details for the setup.

Need credit or debit processing too? We can review it after the register requirements are clear. Changing processors is not required.

Already ordered? Start onboardingUse the Register Finder Shop cash registers Ask a specialistGet a processing reviewCall (855) 867-2647